Double Slide Platen VL-1500ADM

Double Slide Platen VL-1500ADM Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection.
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two lower dies.
  • Both lower dies can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Bite-type fittings to join the metal tubes instead of traditional welding so that it can keep oil circuit clear.


  Item    Unit Mold

Injection system
  Screw Diameter mm 45 50 55
 Injection Pressure kg/cm2 2063 1671 1381
 Shot Volume(Theoratical) cm3 318 392 475
 Shot Weight (PS) g 286 352 427
  oz 10.1 12.4 15.1
 Injection Rate cm3/sec 145 179 217
 Screw Stroke mm 200
Temperature Section - 4+1

Clamping system
Clamping Force tons 150
Platen Size mm 1070*860
Space between Tie Bars mm 720*505
Min. Mould Height mm 300
Opening Stroke mm 300
Max. Mould Height mm 600
Ejector Force tons 4
Ejector Stroke mm 115

Sliding system
Sliding Strok mm 720
Single Sliding platen Size mm 1440*710

System Pressure kg/cm2 140
  Pump Motor Power kw 18.5(4)
  Heater Power kw 9.05
  Total Power kw 27.55
  Machine Weight tons 7.2
  Machine Dimensions m 2.3*1.3*4.6

Send Enquiry
move to top