Double Slide Platen VL-300DM

Double Slide Platen VL-300DM Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection.
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two lower dies.
  • Both lower dies can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Bite-type fittings to join the metal tubes instead of traditional welding so that it can keep oil circuit clear.


  Item    Unit Mold

Injection system
  Screw Diameter mm 25 28 32
 Injection Pressure kg/cm2 1434 1143 875
 Shot Volume(Theoratical) cm3 49.1 61.6 80.1
 Shot Weight (PS) g 45 57 73
  oz 1.6 2 2.6
 Injection Rate cm3/sec 75 93 122
 Screw Stroke mm 100
Temperature Section - 3+1

Clamping system
Clamping Force tons 30
Platen Size mm 520*370
Space between Tie Bars mm 360*205
Min. Mould Height mm 100/140/160/200
Opening Stroke mm 180
Max. Mould Height mm 280/320/340/380
Ejector Force tons 1.7
Ejector Stroke mm 55

Sliding system
Sliding Strok mm 350
Single Sliding platen Size mm 720*350

System Pressure kg/cm2 140
  Pump Motor Power kw 5.5(4)
  Heater Power kw 3.8
  Total Power kw 9.3
  Machine Weight tons 1.3
  Machine Dimensions m 1.65*1.1*2.75

Send Enquiry
move to top