Double Slide Platen VL-450ADM

Double Slide Platen VL-450ADM Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection.
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two lower dies.
  • Both lower dies can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Bite-type fittings to join the metal tubes instead of traditional welding so that it can keep oil circuit clear.


  Item    Unit Mold

Injection system
  Screw Diameter mm 28 32 36
 Injection Pressure kg/cm2 2170 1661 1312
 Shot Volume(Theoratical) cm3 73 96 122
 Shot Weight (PS) g 66 87 109
  oz 2.3 3 3.8
 Injection Rate cm3/sec 41 53 68
 Screw Stroke mm 120
Temperature Section - 3+1

Clamping system
Clamping Force tons 45
Platen Size mm 580*430
Space between Tie Bars mm 405*255
Min. Mould Height mm 150/190/210/250
Opening Stroke mm 200
Max. Mould Height mm 350/390/410/450
Ejector Force tons 1.7
Ejector Stroke mm 55

Sliding system
Sliding Strok mm 420
Single Sliding platen Size mm 820*395

System Pressure kg/cm2 140
  Pump Motor Power kw 5.5
  Heater Power kw 4.75
  Total Power kw 10.25
  Machine Weight tons 1.6
  Machine Dimensions m 1.7*1.15*3

Send Enquiry
move to top