Double Slide Platen VL-550ADM

Double Slide Platen VL-550ADM Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection.
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two lower dies.
  • Both lower dies can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Bite-type fittings to join the metal tubes instead of traditional welding so that it can keep oil circuit clear.


  Item    Unit Mold

Injection system
  Screw Diameter mm 32 36 40
 Injection Pressure kg/cm2 2180 1722 1395
 Shot Volume(Theoratical) cm3 112 142 176
 Shot Weight (PS) g 100 127 158
  oz 3.5 4.5 5.6
 Injection Rate cm3/sec 51 64 80
 Screw Stroke mm 140
Temperature Section - 3+1

Clamping system
Clamping Force tons 55
Platen Size mm 720*560
Space between Tie Bars mm 505*340
Min. Mould Height mm 200/240/260/300
Opening Stroke mm 200
Max. Mould Height mm 400/440/460/500
Ejector Force tons 2.7
Ejector Stroke mm 55

Sliding system
Sliding Strok mm 500
Single Sliding platen Size mm 1000*495

System Pressure kg/cm2 140
  Pump Motor Power kw 7.5
  Heater Power kw 5.55
  Total Power kw 13.05
  Machine Weight tons 2.3
  Machine Dimensions m 1.8*1.15*3.35

Send Enquiry
move to top