Double Slide Platen VL-850ADM

Double Slide Platen VL-850ADM Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection.
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two lower dies.
  • Both lower dies can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Bite-type fittings to join the metal tubes instead of traditional welding so that it can keep oil circuit clear.


  Item    Unit Mold

Injection system
  Screw Diameter mm 36 40 45
 Injection Pressure kg/cm2 2176 1763 1393
 Shot Volume(Theoratical) cm3 163 201 254
 Shot Weight (PS) g 147 181 229
  oz 5.2 6.4 8.1
 Injection Rate cm3/sec 86 106 134
 Screw Stroke mm 160
Temperature Section - 3+1

Clamping system
Clamping Force tons 85
Platen Size mm 880*640
Space between Tie Bars mm 565*320
Min. Mould Height mm 200/240/260/300
Opening Stroke mm 250
Max. Mould Height mm 450/490/510/550
Ejector Force tons 4
Ejector Stroke mm 75

Sliding system
Sliding Strok mm 500
Single Sliding platen Size mm 1000*550

System Pressure kg/cm2 140
  Pump Motor Power kw 15(4)
  Heater Power kw 5.95
  Total Power kw 20.95
  Machine Weight tons 3.2
  Machine Dimensions m 1.95*1.25*3.5

Send Enquiry
move to top