Rotary Type VLR-1200A

Rotary Type VLR-1200A Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using electronic scale to control position with high precision in injecting and clamping.
  • Function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies ,high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately . 
  • Lower die can be slided out by platen ,so that facilitating to put insert and assemble automatic devise.
  • Using bite type fittings to join the metal tubes instead of traditional welding ,so that it can keep oil circuit clear.


 Item Content Unit Mold

Injection system
 Screw Diameter mm 40 45 50
 Injection Pressure kg/cm2 2296 1810 1470
Shot Volume(Theoratical) cm3 226 286 353
 Shot Weight (PS) g 203 257 317
oz 7.1 9.1 11.1
Injection Rate cm3/sec 115 146 180
Screw Stroke mm 180
Temperature Section - 4+1

Clamping systerm
Clamping Force tons 113
Rotary Table Diameter mm 1200
 Min. Mould Height mm 250
Opening Stroke mm 300
Max. Mould Height mm 550
Ejector Force tons 2.2
Ejector Stroke mm 115

System Pressure kg/cm2 140
Pump Motor Power kw 18.5(4)
Heater Power kw 7.85
Heater Power kw 26.35
Machine Weight tons 7

Send Enquiry
move to top