Rotary Type VLR-150 Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using electronic scale to control position with high precision in injecting and clamping.
  • Function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies ,high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately . 
  • Lower die can be slided out by platen ,so that facilitating to put insert and assemble automatic devise.
  • Using bite type fittings to join the metal tubes instead of traditional welding ,so that it can keep oil circuit clear.

 

 Item Content Unit Mold
      VLR-150

Injection system
 Screw Diameter mm 22 25
 Injection Pressure kg/cm2 1715 1098
Shot Volume(Theoratical) cm3 38 49
 Shot Weight (PS) g 34 44
oz 1.2 1.6
Injection Rate cm3/sec 20 30
Screw Stroke mm 100
Temperature Section - 3

Clamping systerm
Clamping Force tons 12
Rotary Table Diameter mm 540
 Min. Mould Height mm 80/140
Opening Stroke mm 160
Max. Mould Height mm 240/300
Ejector Force tons 1.7
Ejector Stroke mm 55

Other
System Pressure kg/cm2 140
Pump Motor Power kw 5.5(4)
Heater Power kw 2
Heater Power kw 7.5
Machine Weight tons 1.7


Send Enquiry
move to top