Rotary Type VLR-1500A

Rotary Type VLR-1500A Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using electronic scale to control position with high precision in injecting and clamping.
  • Function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies ,high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately . 
  • Lower die can be slided out by platen ,so that facilitating to put insert and assemble automatic devise.
  • Using bite type fittings to join the metal tubes instead of traditional welding ,so that it can keep oil circuit clear.


 Item Content Unit Mold

Injection system
 Screw Diameter mm 45 50 55
 Injection Pressure kg/cm2 2063 1671 1381
Shot Volume(Theoratical) cm3 318 392 475
 Shot Weight (PS) g 286 352 427
oz 10.1 12.4 15.1
Injection Rate cm3/sec 145 179 217
Screw Stroke mm 200
Temperature Section - 4+1

Clamping systerm
Clamping Force tons 157
Rotary Table Diameter mm 1400
 Min. Mould Height mm 300
Opening Stroke mm 300
Max. Mould Height mm 600
Ejector Force tons 3.3
Ejector Stroke mm 145

System Pressure kg/cm2 140
Pump Motor Power kw 18.5(4)
Heater Power kw 9.05
Heater Power kw 31.05
Machine Weight tons 8.7

Send Enquiry
move to top