Rotary Type VLR-300 Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using electronic scale to control position with high precision in injecting and clamping.
  • Function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies ,high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately . 
  • Lower die can be slided out by platen ,so that facilitating to put insert and assemble automatic devise.
  • Using bite type fittings to join the metal tubes instead of traditional welding ,so that it can keep oil circuit clear.


 Item Content Unit Mold

Injection system
 Screw Diameter mm 25 28 32
 Injection Pressure kg/cm2 1814 1446 1107
Shot Volume(Theoratical) cm3 54 67 88
 Shot Weight (PS) g 49 60 79
oz 1.7 2.1 2.8
Injection Rate cm3/sec 58 73 95
Screw Stroke mm 110
Temperature Section - 3+1

Clamping systerm
Clamping Force tons 26
Rotary Table Diameter mm 680
 Min. Mould Height mm 100/140/160/200
Opening Stroke mm 180
Max. Mould Height mm 280/320/340/380
Ejector Force tons 1.7
Ejector Stroke mm 75

System Pressure kg/cm2 140
Pump Motor Power kw 7.5(4)
Heater Power kw 3.8
Heater Power kw 11.3
Machine Weight tons 2.5

Send Enquiry
move to top