Rotary Type VR-450A-2RS

Rotary Type VR-450A-2RS Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies, high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately. 
  • The lower die can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Using bite type fittings to join the metal tubes instead of traditional welding, so that it can keep oil circuit clear.

 

 Item Content Unit Mold
      VR-450A-2RS

Injection system
 Screw Diameter mm 28 32 36
 Injection Pressure kg/cm2 2170 1661 1312
Shot Volume(Theoratical) cm3 73 96 122
 Shot Weight (PS) g 66 87 109
oz 2.3 3 3.8
Injection Rate cm3/sec 41 53 68
Screw Stroke mm 120
Temperature Section - 3+1

Clamping systerm
Clamping Force tons 45
Rotary Table Diameter mm 740
 Min. Mould Height mm 150/190/210/250
Opening Stroke mm 200
Max. Mould Height mm 350/390/410/450
Ejector Force tons 1.7
Ejector Stroke mm 75

Other
System Pressure kg/cm2 140
Pump Motor Power kw 7.5
Heater Power kw 4.75
Heater Power kw 12.25
Machine Weight tons 3


Send Enquiry
move to top