Rotary Type VR-850A-2RS

Rotary Type VR-850A-2RS Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies, high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately. 
  • The lower die can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Using bite type fittings to join the metal tubes instead of traditional welding, so that it can keep oil circuit clear.

 

 Item Content Unit Mold
      VR-850A-2RS

Injection system
 Screw Diameter mm 36 40 45
 Injection Pressure kg/cm2 2176 1763 1393
Shot Volume(Theoratical) cm3 163 201 254
 Shot Weight (PS) g 147 181 229
oz 5.2 6.4 8.1
Injection Rate cm3/sec 86 106 134
Screw Stroke mm 160
Temperature Section - 3+1

Clamping systerm
Clamping Force tons 85
Rotary Table Diameter mm 1000
 Min. Mould Height mm 200/240/260/300
Opening Stroke mm 250
Max. Mould Height mm 450/490/510/550
Ejector Force tons 2.2
Ejector Stroke mm 115

Other
System Pressure kg/cm2 140
Pump Motor Power kw 18.5(4)
Heater Power kw 5.95
Heater Power kw 20.95
Machine Weight tons 4.2


Send Enquiry
move to top