Rotary Type VR-200-2RS

Rotary Type VR-200-2RS Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies, high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately. 
  • The lower die can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Using bite type fittings to join the metal tubes instead of traditional welding, so that it can keep oil circuit clear.


 Item Content Unit Mold

Injection system
 Screw Diameter mm 22 25
 Injection Pressure kg/cm2 1715 1098
Shot Volume(Theoratical) cm3 38 49
 Shot Weight (PS) g 34 44
oz 1.2 1.6
Injection Rate cm3/sec 20 30
Screw Stroke mm 100
Temperature Section - 3

Clamping systerm
Clamping Force tons 15
Rotary Table Diameter mm 580
 Min. Mould Height mm 80/140
Opening Stroke mm 180
Max. Mould Height mm 260/320
Ejector Force tons 1.7
Ejector Stroke mm 55

System Pressure kg/cm2 140
Pump Motor Power kw 5.5(4)
Heater Power kw 2
Heater Power kw 7.5
Machine Weight tons 1.7

Send Enquiry
move to top