Rotary Type VR-300-2RS

Rotary Type VR-300-2RS Send Enquiry

  • Less land occupation than horizontal injection molding machine.
  • Hydraulic die locking with average stress.
  • Controlled by computer with high precision
  • Using an electronic scale to control position with high precision in injecting and clamping.
  • The function of low pressure die protection
  • All guide bars use self-lubricant bushes in order to protect die and make machine clear.
  • High productive efficiency with one upper die and two or more than two lower dies, high output can save labor.
  • Two pumps make injection &clamping and eject advance & retract separately. 
  • The lower die can be slided out by the platen so that facilitating to put insert and assemble the automatic device.
  • Using bite type fittings to join the metal tubes instead of traditional welding, so that it can keep oil circuit clear.

 

 Item Content Unit Mold
      VR-300-2RS

Injection system
 Screw Diameter mm 25 28 32
 Injection Pressure kg/cm2 1434 1143 875
Shot Volume(Theoratical) cm3 49.1 61.6 80.1
 Shot Weight (PS) g 45 57 73
oz 1.6 2 2.6
Injection Rate cm3/sec 75 93 122
Screw Stroke mm 100
Temperature Section - 3+1

Clamping systerm
Clamping Force tons 30
Rotary Table Diameter mm 680
 Min. Mould Height mm 100/140/160/200
Opening Stroke mm 180
Max. Mould Height mm 280/320/340/380
Ejector Force tons 1.7
Ejector Stroke mm 75

Other
System Pressure kg/cm2 140
Pump Motor Power kw 7.5(4)
Heater Power kw 3.8
Heater Power kw 11.3
Machine Weight tons 2.5


Send Enquiry
move to top